Bush Hog RMB 1865 Manuale dell'Operatore

©2010 Alamo Group Inc.$0.00Published 11/10 Part No. 50068938COPERATOR’S MANUAL BUSH HOG® 2501 Griffin Ave. Selma, AL 36703334-874-2700www.bushhog.comR

SAFETYRMB 1865 11/10 Safety Section 1-4© 2010 Alamo Group Inc.SAFETYKEEP AWAY FROM ROTATING ELEMENTS to prevent entanglementand possible serious inj

OPERATIONRMB 1865 11/10 Operation Section 4-46© 2010 Alamo Group Inc.OPERATIONTROUBLE POSSIBLE CAUSE POSSIBLE REMEDYClutch Slips Excessively Clutch

Maintenance Section 5-1© 2010 Alamo Group Inc.MAINTENANCE SECTION

MAINTENANCERMB 1866 11/10 Maintenance Section 5-2© 2010 Alamo Group Inc.MAINTENANCELUBRICATIONGeneralGrease all locations shown daily.PTO SHAFT INSP

MAINTENANCERMB 1866 11/10 Maintenance Section 5-3© 2010 Alamo Group Inc.MAINTENANCEHYDRAULIC SYSTEMOil SupplyCheck the oil level in the reservoir da

MAINTENANCERMB 1866 11/10 Maintenance Section 5-4© 2010 Alamo Group Inc.MAINTENANCEHose Replacement1. Replace one hose at a time to avoid the risk o

MAINTENANCERMB 1866 11/10 Maintenance Section 5-5© 2010 Alamo Group Inc.MAINTENANCEFLAIL HEAD1. Frequently inspect the rotor assembly for damaged or

MAINTENANCERMB 1866 11/10 Maintenance Section 5-6© 2010 Alamo Group Inc.MAINTENANCEPTO GEARBOXRefill the gearbox after the first initial 50 hours an

MAINTENANCERMB 1866 11/10 Maintenance Section 5-7© 2010 Alamo Group Inc.MAINTENANCEPROPER TORQUE VALUES FOR FASTENERSThe chart lists the correct tig

LIMITED WARRANTYBush Hog warrants to the original purchaser of any new Bush Hog equipment, purchased from an authorized

TO THE OWNER/OPERATOR/DEALERTo keep your implement running efficiently and safely, read your manual thoroughly and follow these directionsand the Saf

SAFETYRMB 1865 11/10 Safety Section 1-5© 2010 Alamo Group Inc.SAFETYConnecting & Disconnecting Implement Safety Instructions & PracticesThe

RMB 1865-11/10 P/N 50068938CPrinted U.S.ARMB 1865REAR MOUNT BOOM MOWER

SAFETYRMB 1865 11/10 Safety Section 1-6© 2010 Alamo Group Inc.SAFETYEquipment Operation Safety Instructions and PracticesNever leave the Tractor and

SAFETYRMB 1865 11/10 Safety Section 1-7© 2010 Alamo Group Inc.SAFETYDo not back up this implement when the boom or mower head is extended. Backing

SAFETYRMB 1865 11/10 Safety Section 1-8© 2010 Alamo Group Inc.SAFETYFlail Mowers are capable under adverse conditions of throwingobjects for great d

SAFETYRMB 1865 11/10 Safety Section 1-9© 2010 Alamo Group Inc.SAFETYDo not mount or dismount the Tractor while the tractor is moving. Mountthe Tract

SAFETYRMB 1865 11/10 Safety Section 1-10© 2010 Alamo Group Inc.SAFETYDo Not operate this equipment in areas where insects such as bees may attack yo

SAFETYRMB 1865 11/10 Safety Section 1-11© 2010 Alamo Group Inc.SAFETYMany varied objects, such as wire, cable, rope, or chains, can become entangled

SAFETYRMB 1865 11/10 Safety Section 1-12© 2010 Alamo Group Inc.SAFETYMaintenance and Service Safety Instructions and PracticesNever leave the Implem

SAFETYRMB 1865 11/10 Safety Section 1-13© 2010 Alamo Group Inc.SAFETYDO NOT allow any person under a raised boom or mower head unlessit is securely

To the Owner/Operator/DealerAll implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-mindedoperator who

SAFETYRMB 1865 11/10 Safety Section 1-14© 2010 Alamo Group Inc.SAFETYTransporting Safety Instructions and PracticesPerform service, repairs and lubr

SAFETYRMB 1865 11/10 Safety Section 1-15© 2010 Alamo Group Inc.SAFETYSecure the boom and mower head in the transport position before traveling on pu

SAFETYRMB 1865 11/10 Safety Section 1-16© 2010 Alamo Group Inc.SAFETYConcluding Safety Instructions and PracticesTransport only at speeds where you

SAFETYRMB 1865 11/10 Safety Section 1-17© 2010 Alamo Group Inc.SAFETYDecal LocationNOTE: Bush Hog supplies safety decals on this product to promote

SAFETYRMB 1865 11/10 Safety Section 1-18© 2010 Alamo Group Inc.SAFETYITEM PART NO. QTY LEVEL DESCRIPTION1. D433 1 Decal Sheet Multiple Hazard 2. D38

SAFETYRMB 1865 11/10 Safety Section 1-19© 2010 Alamo Group Inc.SAFETYITEM PART NO. QTY LEVEL DESCRIPTION1. 50061049 1 LOGO Bush Hog2. 24028 1 WARNIN

SAFETYRMB 1865 11/10 Safety Section 1-20© 2010 Alamo Group Inc.SAFETYITEM PART NO. QTY LEVEL DESCRIPTION1. 3688303 1 DANGER Sharp Blades 2. 09.821.3

SAFETYRMB 1865 11/10 Safety Section 1-21© 2010 Alamo Group Inc.SAFETYDecal DescriptionMulti Hazard Decal Sheet P/N D433Decal D433 consists of the fo

SAFETYRMB 1865 11/10 Safety Section 1-22© 2010 Alamo Group Inc.SAFETYDriveline HazardsP/N D388Decal D388 consists of the following multi-hazards.

SAFETYRMB 1865 11/10 Safety Section 1-23© 2010 Alamo Group Inc.SAFETYIMPORTANT! Keep Sway Bar Chains TightP/N D355WARNING! Pinch PointsP/N 02962764D

In order to reduce accidents and enhance the safe operation of mowers, Bush Hog, in cooperation with otherindustry manufacturers has developed the AEM

SAFETYRMB 1865 11/10 Safety Section 1-24© 2010 Alamo Group Inc.SAFETYDANGER! Crushing HazardSerious injury can result from contact with movingboom.

SAFETYRMB 1865 11/10 Safety Section 1-25© 2010 Alamo Group Inc.SAFETYINFORMATION - Safety BookletD524Read Operator’s Manual! The operator’s manual i

SAFETYRMB 1865 11/10 Safety Section 1-26© 2010 Alamo Group Inc.SAFETYTO AVOID SERIOUS INJURY OR DEATH onlyoperate on Tractor equipped with fully enc

SAFETYRMB 1865 11/10 Safety Section 1-27© 2010 Alamo Group Inc.SAFETYEuro Multi Decal P/N 09.821.35Red Reflector. Keep reflectors clean and visible

SAFETYRMB 1865 11/10 Safety Section 1-28© 2010 Alamo Group Inc.SAFETYDANGER! Keep Away Sharp Blades.3688303

SAFETYRMB 1865 11/10 Safety Section 1-29© 2010 Alamo Group Inc.SAFETYFederal Laws and RegulationsThis section is intended to explain in broad terms

Introduction Section 2-1© 2010 Alamo Group Inc.INTRODUCTION SECTION

INTRODUCTIONRMB 1865 11/10 Introduction Section 2-2© 2010 Alamo Group Inc.INTRODUCTIONThis Hydraulic Boom Mower is designed with care and built with

INTRODUCTIONRMB 1865 11/10 Introduction Section 2-3© 2010 Alamo Group Inc.INTRODUCTIONThe Bush Hog Boom Mower is primarily designed for grass cuttin

Alamo Group Ag. Division is willing to provideone (1) AEM Mower Safety Practices VideoPlease Send Me: VHS Format – AEM/FEMA Mower Operator Safety Vide

INTRODUCTIONRMB 1865 11/10 Introduction Section 2-4© 2010 Alamo Group Inc.INTRODUCTIONATTENTION OWNER/ OPERATORBEFORE OPERATING THIS MACHINE:1. Care

Assembly Section 3-1© 2010 Alamo Group Inc.ASSEMBLY SECTION

ASSEMBLYRMB 1865 11/10 Assembly Section 3-2© 2010 Alamo Group Inc.ASSEMBLYTRACTOR SELECTIONMINIMUM TRACTOR WEIGHT - including ballast weight if nece

ASSEMBLYRMB 1865 11/10 Assembly Section 3-3© 2010 Alamo Group Inc.ASSEMBLYTRACTOR PREPARATIONFitting Operator GuardUse tractor with safety glass win

ASSEMBLYRMB 1865 11/10 Assembly Section 3-4© 2010 Alamo Group Inc.ASSEMBLYSuggestions to increase stability: • Increasing rear wheel track; a tracto

ASSEMBLYRMB 1865 11/10 Assembly Section 3-5© 2010 Alamo Group Inc.ASSEMBLYATTACHMENT TO TRACTOR• Reverse tractor squarely up to the machine.• Connec

ASSEMBLYRMB 1865 11/10 Assembly Section 3-6© 2010 Alamo Group Inc.ASSEMBLY• Fit the machine to top link (Optional Top Linkavailable).• Raise machine

ASSEMBLYRMB 1865 11/10 Assembly Section 3-7© 2010 Alamo Group Inc.ASSEMBLYThe four levers of machine controls must be operated from the tractor seat

ASSEMBLYRMB 1865 11/10 Assembly Section 3-8© 2010 Alamo Group Inc.ASSEMBLY• Adjust using the mounting hole that allows thePTO and gearbox shaft to a

ASSEMBLYRMB 1865 11/10 Assembly Section 3-9© 2010 Alamo Group Inc.ASSEMBLY• Raise the stand legs into the work position andsecure with lock pins.• T

TABLE OF CONTENTSSAFETY SECTION ...1-1Gener

ASSEMBLYRMB 1865 11/10 Assembly Section 3-10© 2010 Alamo Group Inc.ASSEMBLY• Fit PTO shaft in position. • Attach torque chains to a convenient locat

ASSEMBLYRMB 1865 11/10 Assembly Section 3-11© 2010 Alamo Group Inc.ASSEMBLYFlailhead AttachmentOperate machine controls to maneuver boom arminto fla

ASSEMBLYRMB 1865 11/10 Assembly Section 3-12© 2010 Alamo Group Inc.ASSEMBLYOIL REQUIREMENTSTankRear mounted hydraulic pumps are attached directly to

ASSEMBLYRMB 1865 11/10 Assembly Section 3-13© 2010 Alamo Group Inc.ASSEMBLYREMOVAL FROM TRACTORRead carefully before commencing to remove the machin

Operation Section 4-1© 2010 Alamo Group Inc.OPERATION SECTION

OPERATIONRMB 1865 11/10 Operation Section 4-2© 2010 Alamo Group Inc.OPERATIONBUSH HOG RMB 1865 OPERATING INSTRUCTIONSBush Hog Boom Mowers are manufa

OPERATIONRMB 1865 11/10 Operation Section 4-3© 2010 Alamo Group Inc.OPERATION1. Standard Equipment and SpecificationsStandard SpecificationsTractor

OPERATIONRMB 1865 11/10 Operation Section 4-4© 2010 Alamo Group Inc.OPERATION2. OPERATOR REQUIREMENTSSafe operation of the unit is the responsibilit

OPERATIONRMB 1865 11/10 Operation Section 4-5© 2010 Alamo Group Inc.OPERATION3. TRACTOR REQUIREMENTSIn addition to tractor horsepower and size requi

Boom Unit Pre-Operation Inspection and Service ... 4-12MACHIN

OPERATIONRMB 1865 11/10 Operation Section 4-6© 2010 Alamo Group Inc.OPERATION3.3 Tractor Lighting and SMV EmblemIf the tractor will be operated near

OPERATIONRMB 1865 11/10 Operation Section 4-7© 2010 Alamo Group Inc.OPERATION3.6 Tractor HorsepowerThe horsepower required to operate the mower depe

OPERATIONRMB 1865 11/10 Operation Section 4-8© 2010 Alamo Group Inc.OPERATION3.8 HydraulicsThe RMB 1865 is available with a totally Independent hydr

OPERATIONRMB 1865 11/10 Operation Section 4-9© 2010 Alamo Group Inc.OPERATIONDo not mount or dismount the Tractor while the tractor is moving. Mount

OPERATIONRMB 1865 11/10 Operation Section 4-10© 2010 Alamo Group Inc.OPERATION5. STARTING THE TRACTORThe operator must have a complete understanding

OPERATIONRMB 1865 11/10 Operation Section 4-11© 2010 Alamo Group Inc.OPERATION6. PRE-OPERATION INSPECTION AND SERVICEBefore each use, a pre-operatio

OPERATIONRMB 1865 11/10 Operation Section 4-12© 2010 Alamo Group Inc.OPERATION6.2 Boom Unit Pre-Operation Inspection and ServiceInspect and service

OPERATIONRMB 1865 11/10 Operation Section 4-13© 2010 Alamo Group Inc.OPERATIONFRAME ASSEMBLY• Ensure all bolts and screws are in position andare pro

OPERATIONRMB 1865 11/10 Operation Section 4-14© 2010 Alamo Group Inc.OPERATIONRelieve hydraulic pressure prior to doing any maintenance or repair wo

OPERATIONRMB 1865 11/10 Operation Section 4-15© 2010 Alamo Group Inc.OPERATIONAttention: Oil Filler Cap is also the Pressure Relief Cap.Remove cap s

Safety Section 1-1© 2010 Alamo Group Inc.SAFETY SECTION

OPERATIONRMB 1865 11/10 Operation Section 4-16© 2010 Alamo Group Inc.OPERATIONSICKLE BAR INSPECTION• Inspect blades and blade bolts for loosenessand

OPERATIONRMB 1865 11/10 Operation Section 4-17© 2010 Alamo Group Inc.OPERATIONTractor PRE-OPERATION InspectionTractor ID#________________ Make _____

OPERATIONRMB 1865 11/10 Operation Section 4-18© 2010 Alamo Group Inc.OPERATIONBoom Mower PRE-OPERATION InspectionMower ID#________________ Make ____

OPERATIONRMB 1865 11/10 Operation Section 4-19© 2010 Alamo Group Inc.OPERATION7. MACHINE CONTROLS7.1 Cable Controlled Models Only7.2 Lever Functions

OPERATIONRMB 1865 11/10 Operation Section 4-20© 2010 Alamo Group Inc.OPERATIONAn angle float position can be selected which allows the flail head to

OPERATIONRMB 1865 11/10 Operation Section 4-21© 2010 Alamo Group Inc.OPERATION8. Rotor Controls-Gear Hydraulic Machine OnlyREVERSING ROTATION• Selec

OPERATIONRMB 1865 11/10 Operation Section 4-22© 2010 Alamo Group Inc.OPERATION9. BREAKAWAYThe machine is fitted with a hydraulic breakaway device wh

OPERATIONRMB 1865 11/10 Operation Section 4-23© 2010 Alamo Group Inc.OPERATION9.1 Powered SlewThe slew feature allows a 95° arc of powered arm movem

OPERATIONRMB 1865 11/10 Operation Section 4-24© 2010 Alamo Group Inc.OPERATION10. WIRE TRAPThe flail head is equipped with a wire cutting edgewelded

OPERATIONRMB 1865 11/10 Operation Section 4-25© 2010 Alamo Group Inc.OPERATION13. High Voltage CablesDepending on the voltage of the cables and the

SAFETYRMB 1865 11/10 Safety Section 1-2© 2010 Alamo Group Inc.SAFETYGeneral Safety Instructions and PracticesA careful operator is the best operator

OPERATIONRMB 1865 11/10 Operation Section 4-26© 2010 Alamo Group Inc.OPERATIONCut the side and bottom of the road side.Top cut the hedge to the heig

OPERATIONRMB 1865 11/10 Operation Section 4-27© 2010 Alamo Group Inc.OPERATION15. DRIVING THE TRACTOR AND IMPLEMENTSafe tractor transport requires t

OPERATIONRMB 1865 11/10 Operation Section 4-28© 2010 Alamo Group Inc.OPERATION15.1 Starting the TractorThe procedure to start the tractor is model s

OPERATIONRMB 1865 11/10 Operation Section 4-29© 2010 Alamo Group Inc.OPERATION15.3 Driving the Tractor and BoomStart off driving at a slow speed and

OPERATIONRMB 1865 11/10 Operation Section 4-30© 2010 Alamo Group Inc.OPERATION16. OPERATING THE TRACTOR AND IMPLEMENTTHE OPERATOR MUST COMPLETELY UN

OPERATIONRMB 1865 11/10 Operation Section 4-31© 2010 Alamo Group Inc.OPERATION16.2 Bystanders/Passersby PrecautionsIf a bystander comes within 300 f

OPERATIONRMB 1865 11/10 Operation Section 4-32© 2010 Alamo Group Inc.OPERATION16.4 Operating Speed and Ground SpeedGround speed for mowing will depe

OPERATIONRMB 1865 11/10 Operation Section 4-33© 2010 Alamo Group Inc.OPERATIONThere are obvious and hidden potential hazards in the operation of thi

OPERATIONRMB 1865 11/10 Operation Section 4-34© 2010 Alamo Group Inc.OPERATION16.6 Operating the Attached Mower HeadsRefer to the Assembly Section o

OPERATIONRMB 1865 11/10 Operation Section 4-35© 2010 Alamo Group Inc.OPERATION16.7 Shutting Down the Attached HeadTo shut down attached mower head,

SAFETYRMB 1865 11/10 Safety Section 1-3© 2010 Alamo Group Inc.SAFETYOperator Safety Instructions and PracticesEngine Exhaust, some of its constituen

OPERATIONRMB 1865 11/10 Operation Section 4-36© 2010 Alamo Group Inc.OPERATION17. TRACTOR, BOOM, AND ATTACHED HEAD STORAGEProperly preparing and sto

OPERATIONRMB 1865 11/10 Operation Section 4-37© 2010 Alamo Group Inc.OPERATIONTRANSPORT POSITION• Select ROTOR OFF and wait until rotor hasstopped t

OPERATIONRMB 1865 11/10 Operation Section 4-38© 2010 Alamo Group Inc.OPERATION• Operate “REACH IN” until dipper arm contactsthe transport cradle.• S

OPERATIONRMB 1865 11/10 Operation Section 4-39© 2010 Alamo Group Inc.OPERATION19. TRANSPORT POSITION-Head AttachedThe machine is transported in line

OPERATIONRMB 1865 11/10 Operation Section 4-40© 2010 Alamo Group Inc.OPERATIONNOTE: Ensure that the mower sections are fully raised and that the tra

OPERATIONRMB 1865 11/10 Operation Section 4-41© 2010 Alamo Group Inc.OPERATIONThe SMV (Slow-Moving Vehicle) emblem isuniversal symbol used to alert

OPERATIONRMB 1865 11/10 Operation Section 4-42© 2010 Alamo Group Inc.OPERATIONReduce speed before turning or applying the brakes.Ensure that both br

OPERATIONRMB 1865 11/10 Operation Section 4-43© 2010 Alamo Group Inc.OPERATIONUse adequately sized and rated trailers andequipment to transport the

OPERATIONRMB 1865 11/10 Operation Section 4-44© 2010 Alamo Group Inc.OPERATION21. TROUBLESHOOTING GUIDETROUBLE POSSIBLE CAUSE POSSIBLE REMEDYHydraul

OPERATIONRMB 1865 11/10 Operation Section 4-45© 2010 Alamo Group Inc.OPERATIONTROUBLE POSSIBLE CAUSE POSSIBLE REMEDYExcessive Vibrations Blade Broke